Delta Faucet Quick Connect Problem

Install the bonnet and sleeve making sure the o ring is behind the groove on the brass valve body.

Delta faucet quick connect problem.

Reinstall the cartridge making sure thatthe key is fully engaged with the slot in the brass body. We suggest that you replace the vegetable sprayer hose. The white retainer and o ring were most likely displaced through installation and removal of the quick connect hose connections. Reinstall the cap on thecartridge.

Here s how to disconnect sprayer hose from delta faucet. With quick snap connections newer delta widespread faucets feature quick snap installation. Removethe sleeve bonnet and cartridge. If you have quick snap connections and experience leaking at the connection points quick snap may not have been properly installed.

Reinstall the cap on the cartridge. If the fitting is only pushed in past the collet and has not created a seal water will be able to bypass the collet s teeth and exit out of the fitting. Make sure the water suppliesare turned off. When pushing the quick connect fitting onto the tubing ensure that you have pushed the tubing in far enough that it has depressed the o ring and sealed the fitting.

Follow these steps to check the quick snap connections. The exact repair part will depend on the model and age of your faucet. Unscrew the slide nut that holds the spray head together. Pull the trigger to drain out any water that still remains in the hose.

Pull the cap from the cartridge androtate it 180 degrees or one half turn. Removing the old sprayer hose.